VeriFone VX680 Quick Start Manual

Electrical
Power Packs
Before you connect the terminal power pack to an electrical outlet, check that the on/off power switch on the terminal is off. If the terminal does not have an on/off
switch, check that the power cable connector is removed from the terminal's power port.
Or, when connecting the terminal to a power pack, always connect the plug of the power pack to an electrical wall outlet first. Then connect the power cable to the
terminal's power port.
The power pack is rated as follows:
• Input Voltage: 100 - 240V AC, 50/60 Hz
• Output Voltage: 12V DC, 2A
Model VX680-B-BTC is intended to be provided with a listed power supply module having an output rating of 12V DC, minimum 2.0A and evaluated as a Limited
Power Source or PS2 or equivalent.
AC Adapter
The AC adapter is designed to ensure your personal safety and to be compatible with this equipment. Please follow these guidelines:
• Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet.
• Allow adequate ventilation around the adapter. Avoid locations with restricted airflow.
• Connect the adapter to a proper power source. The voltage and grounding requirements are found on the product case and/or packaging.
• Do not use the adapter if the cord becomes damaged.
• Do not attempt to service the adapter. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.
Separate Power Sources
Some peripherals require a separate power source. Before connecting a check reader or similar device, remove the power cable connector from the terminal's power port.
Peripherals
Before connecting any peripheral device, turn off power to the terminal and check that the power cable connector is removed from the terminal's power port. Turn on power only
after you are finished connecting the peripheral device(s). For complete information about peripheral installation and use, please refer to the user documentation supplied with
those devices.
Telecommunication Cord
CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord.
ATTENTION: Pour réduire les risques d'incendie, utilisez uniquement les cordons téléphoniques No. 26 AWG ou UL Listed ou certifiés CSA.
Disconnecting Power
Disconnecting power during a transaction may cause transaction data files that are not yet stored in terminal memory to be lost.
Location – Electrical Considerations
WARNING! This device contains sensitive electronic components that can be permanently damaged if exposed to excessive shock, electrical interference or vibration.
AVERTISSEMENT! Cet appareil contient des composants électroniques sensibles qui peuvent être endommagés de façon permanente si elle est exposée à des chocs
excessifs, des interférences électriques ou des vibrations.
CAUTION: Due to risk of electrical shock or terminal damage, do not use the terminal near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool. Also, avoid using this product during electrical storms.
Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, neon
signs, high-frequency or magnetic security devices, or electric motors).
ATTENTION: Du fait d'un risque d'électrocution ou d'une détérioration du terminal, ne pas utiliser cet équipement près d'une source d'eau, par exemple près d'une baignoire,
d'un lavabo, d'un évier de cuisine ou d'un bac de lavage, dans un sous-sol humide ou à proximité d'une piscine. De même, éviter d'utiliser ce produit lors des
orages provoquant des coupures électriques.
Éviter de placer le terminal à proximité d'appareils électriques ou autres unités pouvant entraîner des fluctuations de tension importantes ou des interférences
électriques, tels que les climatiseurs, enseignes au néon, dispositifs de sécurité à haute fréquence ou équipements électriques.Equipment
Repairs
Do not, under any circumstances, attempt any service, adjustments, or repairs on this equipment. Instead, contact your local Verifone distributor or service provider for
assistance. Failure to comply may void the product warranty.
Location – Environmental Considerations
Do not plug the power pack into an outdoor outlet. The terminal is not waterproof or dustproof and should not be used outside the normal operating temperature range. Any
damage to the unit from exposure to water or dust may void your warranty.
Do not use the terminal where there is high heat, dust, humidity, moisture, or caustic chemicals or oils. Keep the terminal away from direct sunlight and anything that radiates
heat, such as a stove or a motor.
Ne pas brancher le bloc d'alimentation sur une prise extérieure. De même, le terminal ne doit pas être utilisé à l'extérieur. Il n'est étanche ni à l'eau, ni aux poussières et est
conçu pour être utilisé uniquement à l'intérieur. Tout dommage résultant de l'exposition à la pluie ou à la poussière peut annuler la garantie de l'appareil.
Ne pas utiliser le terminal à proximité de sources dégageant une forte chaleur, de la poussière, de l'humidité ou de la buée, ni dans un milieu où l'on manipule des produits
huileux ou des produits chimiques caustiques. Placer le terminal à l'abri des rayons directs du soleil et de tout appareil dégageant de la chaleur, tel qu'un fourneau ou un
moteur.
WARNING! Your device contains sensitive electronic components that can be permanently damaged if exposed to excessive shock or vibration. To minimize the risk of
damage to your device, avoid dropping your device and operating it in high-shock and high-vibration environments. Do not store the device where prolonged
exposure to extreme temperature can occur, because it can cause permanent damage. Do not expose the device to water. Contact with water can cause this
unit to malfunction.
AVERTISSEMENT! Votre dispositif contient des composants électroniques sensibles, susceptibles de subir des dommages définitifs en cas d'exposition à des chocs ou à des
vibrations excessives. Pour minimiser le risque de dommages pour votre terminal, éviter de le faire tomber ou de l'exposer à des environnements pouvant
provoquer des chocs et des vibrations excessives. Ne pas stocker le terminal dans des lieux susceptibles d'entraîner une exposition prolongée à des
températures extrêmes, du fait des dommages définitifs que cette situation peut provoquer. Ne pas exposer le terminal à l'eau. Un contact avec de l'eau peut
provoquer un dysfonctionnement de l'unité.
VX680-B-BTC Certifications and Regulations
Verifone Part Number: DOC268-015-EN-E Revision E02
,
© 2021 Verifone, Inc. All rights reserved.
Verifone, Inc.
1-800-Verifone
www.verifone.com
*DOC268-015-EN-E*
VX680-B-BTC Certifications and Regulations
FCC Compliance
The following device has been tested and certified as compliant with the regulations and guidelines set forth in Part 15 and Part 68 of
FCC Rules:
Manufacturer: Verifone, Inc.
Brand: Verifone
Model: VX680-B-BTC
Battery Instructions
Dispose of the battery pack in accordance with all national, state, and local laws and regulations as regionally required. Some batteries may be recycled and may be accepted
for disposal at local recycling centers.
CAUTION: There is risk of explosion if the battery is replaced by an incorrect type.
ATTENTION : Existe un risque d'explosion si la batterie est remplacée par un modèle incompatible.
– leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
– a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Part 15 of FCC Rules
This device complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules which provide reasonable protection against harmful interference in a
residential installation.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications to this equipment not
expressly approved by Verifone could void the user's authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult with the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Use of a shielded interface cable is required to comply
with the Class B limits of Part 15 of FCC Rules. Any changes or modifications to this equipment not expressly approved by Verifone could void the user's authority to operate
this equipment.
Notice for Operating Frequency and Output Power
WLAN (BT): 8.65 dBm (BT EDR)
Part 68 of FCC Rules
This equipment complies with 47 CFR Part 68 of the FCC Rules. On the modem board inside this equipment is a label that contains, among other information, the FCC
registration number and ringer equivalence number (REN) for this equipment. If requested, this information may be provided to the telephone company.
The REN is used to determine the quantity of devices that may be connected to the telephone line. Excessive RENs on the telephone line may result in the device not ringing in
response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the
line, as determined by the total RENs, contact the telephone company to determine the maximum RENs for the calling area.
This device complies with FCC established rules permitting this device to be directly connected to the telephone network.
This terminal cannot be used on telephone-company-provided coin service. Connection to Party Line Service is subject to state tariffs.
This equipment uses the following USOC jacks: (RJ11C).
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring
using a compatible modular jack that is Part 68 compliant.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance
notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe
it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of this equipment. If this happens, the
telephone company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact Verifone, or your local Verifone distributor or service center in the U.S.A. for repair and/or warranty information. If
the trouble is causing harm to the telephone network, the telephone company may request you to remove this equipment from the network install an AC surge arrestor in the AC
outlet to which this device is connected. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with Council Recommendation 2014/35/EU, IC RSS-102 and
FCC RF exposure requirement, a minimum separation distance of 20 cm must be maintained between the user's body and the device, including the antenna. Conditions that do
not meet these requirements may not comply with Council Recommendations 2014/35/EU, IC RSS-102, and FCC RF exposure requirements and should be avoided.
Recycling: DO NOT DISCARD!
UNIT MUST BE RECYCLED OR DISPOSED OF PROPERLY
For proper disposal instructions, go to http://recycle.verifone.com/
continued on rear cover
Recyclage: NE PAS JETER!
L'unité doit être recyclée ou mise au rebut dans les endroits prévus à cet effet.
Pour connaître les procédures de mise au rebut, consultez le site http://recycle.verifone.com/
suite au verso
Please retain this sheet for future reference.
À conserver pour référence ultérieure.