Installing/Replacing Msam Cards - VeriFone VX 680 Installation Manual

T S
ERMINAL ETUP

Installing/Replacing MSAM Cards

CAUTION
Installing/
Replacing MSAM
Cards
CAUTION
To Install/Replace
MSAM
22
VX 680 I
NSTALLATION
8
Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door.
To prevent damaging the print roller, always gently press down on the paper roll
cover to close it.
Figure 11 Closing Paper Roll Cover
9
Tear the paper off against the serrated plastic strip in the printer.
When you first receive your VX 680 terminal, you may need to install an MSAM
card or you may need to replace old cards.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
1
Power off the terminal.
2
Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
G
UIDE