Battery Behavior (No Power Cable); Manual Startup; Manual Shutdown - VeriFone VX 680 Installation Manual

Battery Behavior
(No Power
Cable)

Manual Startup

NOTE
NOTE

Manual Shutdown

NOTE
If you connect the VX 680 to a non-battery power source, the terminal shifts to
cabled power mode and starts up automatically, regardless of the battery charge
state.
Hold the green key down for about 4 seconds until the terminal displays the
startup screen.
The 4-second power-up delay is for preventing terminal startup if the green key is
accidentally held down. The time required to hold the green key down to power up
the terminal is configurable (for more information, see the VX 680 Reference
Manual – VPN
DOC268-004-EN-A
When the terminal has power, the terminal lights are activated and the green LED
indicator remains lit.
If an application is loaded in the terminal, it starts after the initial VeriFone
copyright screen and usually displays a unique copyright screen. If no application
is loaded in the terminal,
VeriFone copyright screen.
Hold the red key down for about 4 seconds until the terminal displays the
shutdown verification screen. Keep holding the red key until the VX 680 terminal
shuts down.
•
The 4-second shutdown delay is for preventing terminal shutdown if the red
key is accidentally held down. The time required to hold the red key down to
shut down the terminal is configurable (for more information, see the VX 680
Reference Manual – VPN
•
When the terminal has no power, the screen is blank and the green LED
indicator is not lit.
).
appears on screen after the initial
DOWNLOAD NEEDED
).
DOC268-004-EN-A
T
ERMINAL

Battery Behavior (No Power Cable)

VX 680 I G
NSTALLATION UIDE
S
ETUP
29