13
7
Press [Enter].
Turning the security reception on immediately
The machine will enter the security reception mode automatically at the
time you have set.
However, if you want to set the machine in the security reception mode
immediately, you can do this by the following procedure:
Note
To enable the following procedure, the security reception feature must be
set to active. (See "Activating security reception" on page 13-5.)
To turn the security reception immediately
1
Press [Advanced Functions] repeat-
edly until "Security" is appear then
press [Enter].
or
Press the soft key assigned to "Se-
curity".
2
Enter the four-digit passcode.
If you are using the soft key, skip to step 5 after you have entered the
passcode.
3
Press [Enter].
4
Press [,] or [+] to select "On".
5
Press [Enter]. The machine returns to the standby mode.
13-6
Security features
bizhub 131f/190f