One-Touch Keys; Entering Or Changing A One-Touch Number - Konica Minolta bizhub 131f Advanced Information

Autodialer
8.2

One-touch keys

8.2.1

Entering or changing a one-touch number

Your machine can store up to 40 one-touch numbers using the keys marked
1 to 40.
1
Press [Menu], [1], [1], [1], [Enter]. The
empty one-touch number will be
shown.
2
Press [,] or [+] to select a one-touch number.
You can also select a one-touch key by pressing that key.
3
Press [Enter].
4
Use the numeric keys to enter the number exactly as your machine.
should dial it. The number can be stored up to 40 digits.
To change a number, press [*] or [)] to move the cursor, press [Can-
cel] to erase the number. Then re-enter the number correctly.
5
Press [Enter].
6
Use the numeric keys to enter the name for the one-touch key. The
name can be stored up to 24 characters.
Regarding how to enter the character, see "Entering character" on
page 4-4.
To change a name, press [*] or [)] to move the cursor, press [Cancel]
to erase the name. Then re-enter the name correctly.
7
Press [Enter] to save the setting.
The next empty one-touch number will be shown.
8
To enter another one-touch number, repeat the procedure from step 2.
To exit the operation and return to standby mode, press [Reset].
bizhub 131f/190f
8
8-5