Running A Transport Cleaning Sheet; Final Cleaning Steps - Kodak i4000 series User Manual

Running a transport
cleaning sheet

Final cleaning steps

5-10
The transport should be cleaned with a Transport Cleaning Sheet fed several
times.
1. Remove the wrapping from the Transport Cleaning Sheet.
2. Adjust the side guides to the widest position.
3. Place the transport cleaning sheet in the center of the input elevator in
landscape orientation with the adhesive side up.
4. Remove the transport cleaning sheet from the output tray and place it in
the center of the input elevator in landscape orientation with the adhesive
side down and rescan.
NOTE: When the transport sheet gets dirty and/or loses its tackiness, discard
it and use a new one.
When finished running the transport cleaning sheet:
1. Open the scanner cover.
2. Wipe the exposed side of the upper and lower imaging guides with a lint-
free cloth.
3. Close the scanner cover and scan a test image to ensure image quality.
A-61651 November 2012