Extension Intercept Routing — Day / Night - Panasonic KX-TD816E Installation Manual

4.8 Extension Programming
Extension Intercept Routing — Day / Night
Description
Selection
Default
Programming
Conditions
Feature References
Sets the Intercept Routing destination of for each jack in both day
and night modes.
• Jack number: KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all jacks, -1 = first part, -2 = second part)
• Extension number: 2 through 4 digits / Disable (no Intercept
Routing)
All jacks – Disable — Day / Night
1. Enter a program address (620 for day or 621 for night).
Display example: EXT Intercep Day
2. Press NEXT.
Display: Jack NO?→
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack
number.
Display example: #01-1: Disable
4. Enter an extension number.
To change the current entry, press CLEAR and enter the new number.
To disable Intercept Routing, press CLEAR.
5. Press STORE.
6. To program another jack number, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• You can set the extension numbers in programs [003] "Extension
Number Set," [127] "Voice Mail Extension Number Assignment," [130]
"Phantom Extension Number" and also floating numbers of the external
ringer, hunting groups, and pagers in program [813] "Floating Number
Assignment."
• To assign all jacks to one selection, press the
case, the display shows the contents programmed for jack 01.
• When "Disable" is selected, Intercept Routing is provided according to
the assignment in program [409]–[410].
Section 3, Features,
Intercept Routing
620-621
(-1 / -2)
(-1 / -2)
key in step 3. In this
System Programming 4-142.3