120
Description
Selection
Default
Programming
Conditions
Feature Reference
4-60
System Programming
4.3
System Programming
User Password
Assigns the password required for entering User Programming
(Manager Programming) mode.
In the User Programming Mode, any display proprietary telephone
user in the system can set the programs [000] through [020].
Password: 4 through 7 digits
1234
1.
Enter 120.
Display: User Password
2.
Press NEXT.
Display example: Password:1234
3.
Enter a password.
To change the current entry, press CLEAR and the new password.
4.
Press STORE.
5.
Press END.
• The password can be from four to seven digits long. The valid numbers
are from 0 through 9.
• If less than four digits are entered, they are not stored.
• You cannot leave the entry empty.
Section 3, Features,
User Programming (Manager Programming)