681
8.4
Description
Selection
Default
Programming
Conditions
Feature References
8-68
DECT Portable Station Section
DECT PS System Programming
PS Radio System ID Set
Assigns a radio system ID which is required for each PS to
distinguish its registered PBX. The radio system ID must be eight
digits, starting with 00 and followed by the last six digits of the
master system serial number.
<Example> Master system serial number: 8BAVB123456
Radio system ID: 00123456
• Radio system ID: 8 digits
Not stored
1.
Enter 681.
Display: Radio Sys-ID Set
2.
Press NEXT.
Display: Not Stored
3.
Enter the radio system ID.
Display example: 00123456
4.
Press STORE.
5.
Press END.
• Be sure not to assign the same radio system ID to a different PBX, or
the PS may not operate properly.
• The radio system ID must be assigned to support the DECT system
(KX-TD144 / KX-TD142). Otherwise, the wired extension port of the
KX-TD144 can be used.
• If the radio system ID is not assigned properly, the registered PS may
not work properly.
• If once assigned, you should not change the radio system ID. To
change it, you must remove all the PS registration first.
• After this assignment, you should reset the system so that this
assignment is activated.
None