4.7
COS Programming
Description
Selection
Default
Programming
Conditions
Feature References
Door Opener Access
Enables or disables to unlock the door opener by feature number on
a Class of Service (COS) basis.
• COS number: 1 through 8,
• Enable / Disable
All COS – Enable
1.
Enter 511.
Display: Door Opener
2.
Press NEXT.
Display: COS NO?–>
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1: Enable
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7.
Repeat steps 4 through 6.
8.
Press END.
To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
Section 3, Features,
Door Opener
( =all COS)
key at step 3. In this
System Programming
511
4-121