Panasonic KX-TD816E Installation Manual page 200

L
L
imited Call Duration
Description
Conditions
Programming References
Feature References
Operation References
L
ine Access, Automatic
Description
Conditions
3-90 Features
Limited Call Duration is a system programmable feature that
disconnects an outside call when a specified timer expires. A
warning tone is sent to the extension user 15 seconds, 10 seconds,
and 5 seconds before the time-limit. Limiting the call duration can
be enabled or disabled by Class of Service (COS) for each
extension.
It is programmable to select the limited call, either incoming and
outgoing call or outgoing call only.
Section 4, System Programming,
[205] Extension-to-CO Line Call Duration Time
[502] Extension-to-CO Line Call Duration Limit
[990] System Additional Information, Field (12)
Section 3, Features,
Call Forwarding – to CO Line
Not applicable.
Allows the extension user to dial the automatic line access number
and access an idle line from the CO line groups assigned for the
extension. The proprietary telephone user can use the Loop-CO
button in place of the access number.
• This feature functions with Least Cost Routing (LCR), if LCR is
enabled. If so, the least expensive route is automatically selected.
• Each extension is subject to system programming items for CO lines
available to access.
• An idle CO line is selected from the CO line groups assigned to the
station. If one CO line group is available, an idle line is selected from
that group. If multiple CO line groups are available, the CO line group
hunting sequence is determined by system programming.
3 Features
Call Transfer, Screened – to
CO Line