4.7
COS Programming
Off-Hook Call Announcement (OHCA)
Description
Selection
Default
Programming
Conditions
Feature References
Enables or disables to perform the Off-Hook Call Announcement
(OHCA) and Whisper OHCA on a Class of Service (COS) basis.
• COS number: 1 through 8,
• Enable / Disable
All COS – Enable
1.
Enter 519.
Display: OHCA
2.
Press NEXT.
Display: COS NO?→
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Enable
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7.
Repeat steps 4 through 6.
8.
Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
• Program [613] "ISDN Class of Service" is used to assign a Class of
Service to each ISDN extension.
Section 3, Features,
Off-hook Call Announcement (OHCA)
Whisper OHCA
( =all COS)
key in step 3. In this
System Programming
519
4-125.2