23.
The last page of the wizard displays. Click Finish. You can leave the CD‐ROM in the PC drive.
24.
Open the Printers or Printers and Faxes window and make sure that the new printer is
displayed.
Installation of the printer driver is now complete.
Next Steps
Continue with installing the Status Monitor. Refer to "Installing the Status Monitor" on
page
55.
After installing the driver and Status Monitor, you can install the optional Datacard SR‐CR
retransfer printer plug‐in.
If you want to delete the printer, restart Windows and then follow the steps in "Removing the
Printer Driver" on page
SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide
81.
75