14.
Select the Make this the default printer check box if you plan to use only this printer from
this PC. Click Next.
15.
The printer is installed with sharing enabled by default. Use the default name or enter a
Share name if needed, and then click Next. The Share name cannot contain any spaces.
Sharing can be disabled after the driver is installed, if needed.
To share the printer, refer to "Sharing a Printer on a Network Connection" on page
16.
Select Create a new port and then click Next.
SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide
if
76.
71