13.
The printer is installed with sharing enabled by default. Enter a Share name if needed, and
then click Next. The Share name cannot contain any spaces.
Use the printer name shown or, if you plan to share the printer, remove the space so that
it displays as SR‐CPU1.
To share the printer, refer to "Sharing a Printer on a Network Connection" on page
Sharing can be disabled after the driver is installed, if needed.
14.
Select Create a new port and use the port name provided. Click Next.
SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide
76.
47