Installing the pcProx Reader
1.
Install the driver.
a.
Connect the USB cable for the reader to the computer. A message displays indicating that
driver is installing.
b.
A message displays when the driver installation is complete. Click Close.
c.
Open the Device Manager and click Human Interface Devices to expand the installed
devices list. The driver for the pcProx reader displays as USB Input Device.
2.
Install the pcProx and AIR ID Enroll Configuration Utility.
a.
Get the pcProx and AIR ID Enroll Configuration Utility software from Datacard.com.
b.
Proceed through the installation wizard to install the AIR ID Configuration Utility. The
program folder displays in the All programs list as RF IDeas. Click the RF IDeas program
folder to expand the installed files.
c.
Click pcProx.exe to open and use the AIR ID Card Manager.
SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide
25