Regency™ Series Options; The Kensington ® Front Installation - FPI P36D-NG1 Owners & Installation Manual

1) Bend tabs downwards located at the back of The Kensington
Front.
Backside of front shown.
2) Secure the bottom frame of the Front by loosening the inner screw
on the hinge brackets on both the left and right side of the fi rebox.
Slide frame in place and secure.
Hinge bracket on
bottom of fi rebox
Kensington Front
frame
3) Slide tabs into louver brackets located on the inside top of the
fi rebox.
Bracket inside
top of fi rebox.
60
THE KENSINGTON
Bend tabs
downwards.
Left Side Shown
REGENCY™ SERIES OPTIONS
FRONT INSTALLATION
®
® 4) Remove existing control switch box from under fi rebox by disconnecting
wires connected to the valve at TH-TH/TP terminals and discard.
Control Box
5) Connect the ON/OFF switch wires coming from the left side of the
Front to the valve, with black hooked up to the TH/TP terminal and
red hooked up to the TH terminal.
NOTE: If fan option is not used please see step (5) of optional fan
installation for placement of fan control box.
Fan Control Box
6) For optional fan installation, see
section.
7) For 2-panel & 3-panel door installation, see
Installation & 3-Panel Door Installation" sections.
Tabs
FPI P36D-1 Zero Clearance Direct Vent Gas Fireplace
Wires connected to Valve.
Valve
ON/OFF Switch
Wires
"Optional Fan Installation"
"2-Panel Door