Sanyo SPW-C1155DXHN8 Technical Data & Service Manual page 78

3. Timer Remote Controller
Weekly Program Function (Continued)
4. Set the program pattern.
(program step 3)
There are 4 program patterns.
Pressing /
Pattern 1
The indoor unit starts operation at the programmed
time.
Pattern 2
The indoor unit stops operation at the programmed
time.
Pattern 3
The indoor unit starts operation at the programmed
time and changes the temperature settings.
1
Press /
Pattern 4
The indoor unit changes the temperature setting at
the programmed time.
2
Press /
Select the program pattern and press
3
Note
If you press during the setting, it returns to the program confirmation mode.
If there is no operation made for 3 minutes during the setting, it returns to the normal mode.
In this case, all the settings in progress will be invalid.
4
5
6
7
8
repeats the following display patterns.
to change the temperature setting.
to change the temperature setting.
. The program timer setting is confirmed and the unit enters the confirmation mode
Control of W-2WAY ECO-i SYSTEM
Pattern 1
Pattern 2
Pattern 3
Pattern 4
3-32
.