Tabletop Mounting - AT&T E5921 User Manual

Getting started
Installation options
3. To attach the bracket for wall mounting,
insert the tabs of the bracket into slots
and on the telephone base, then press
the other bracket tabs into slots
as shown on the right.
4. Plug the power adapter into an electrical
outlet not controlled by a wall switch. Plug
the telephone line cord into a telephone
wall jack. To mount the telephone on the
wall, position the mounting holes
over the telephone outlet mounting studs.
Press and slide the bracket down firmly so
the telephone is held securely on the tel-
ephone outlet mounting studs.

Tabletop mounting

To change back from wall mounting to tabletop mounting, follow the direc-
tions below.
1. Remove the telephone base from the wall.
Unplug the cords from the wall jacks. Remove
the bracket from the telephone base.
3. Route cords through slots. Plug the
other end of the telephone line cord
into a telephone wall jack. Plug the
large end of the larger power adapter
into an electrical outlet not controlled
by a wall switch.
and
and
Telephone outlet mounting studs
2. Insert the bracket tabs into slots
9
and on the telephone base,
then press the other bracket tabs
into slots and .