Power Windows - Skoda Octavia Owner's Manual

Note
•
The working life of the alarm siren is 6 years. More detailed information is avail-
able by a specialist garage.
•
Before leaving the car, check that all the doors, windows and the electric
sliding/tilting roof are properly closed in order to ensure that the anti-theft alarm
system is fully operational.
•
Coding of the radio remote control and the receiver unit precludes the use of the
radio remote control from other vehicles.
Interior monitor and Towing protection monitoring
Switch off the interior monitor and towing protection monitoring
– Switch off the ignition.
– Open the driver door.
– Press the button  at the centre column on the driver side

symbol which lights up in the button changes from red to orange.
– Lock the vehicle within 30 seconds.
The interior monitor and the towing protection monitoring are switched on again
automatically the next time the car is locked.
Note
•
You can switch the interior monitor and the towing protection monitoring off if
there is a possibility that movements from (e.g. children or animals) inside the
vehicle interior or if the vehicle must be transported (e.g. by train or ship) or towed,
might trigger the alarm.
Using the system Safety
Fig. 32 Button for interior monitor and
towing protection monitoring
 fig.
32, the
Driving Tips
•
You can also switch off the interior monitor and the towing protection moni-
toring, by deactivating the safe securing system  page 37.
•
The opened storage compartment for spectacles reduces the effectiveness of
the interior monitor. In order to ensure the function of the interior monitor to be
fully operational, always close the storage compartment for spectacles before
locking the vehicle.

Power windows

Buttons on the driver's door
The power windows operate only when ignition is switched on.
Opening a window
– A window is opened by pressing lightly on the respective button in the door. The
process stops when one releases the button.
– Additionally you can open the window automatically (fully opened) by pressing
the button up to the stop. Renewed pressing of the button causes the window
to stop immediately.
Closing a window
– A window is closed through pulling lightly on the respective button in the door.
The closing process stops when one releases the button.
– Additionally you can close the window automatically (fully closed) by pulling the
button up to the stop. Renewed pulling of the button causes the window to stop
immediately.
General Maintenance Breakdown assistance
Unlocking and locking 43
Fig. 33 Buttons on the driver's door
Technical data