Skoda Octavia Owner's Manual page 223

222 Fuses and light bulbs
Removing the headlight
The headlight must be removed in order to change the light bulb of the parking
lights, low beam lights and main beam lights as well as the turn signal lights.
Removing the headlight
– Switch the ignition and all lights off.
Open the bonnet  page 187.
–
A  fig.
– Unscrew the plastic nut
A
A
– Pull the fuse in upward direction.
B
– Pull the locking lever of the headlight as far as the stop in the direction of arrow
A .
1
– Unplug the plug connector and carefully take out the headlight in the direction
of arrow A .
2
Installation takes place in the reverse order.
Note
After installing the headlight, the headlight setting must be checked by a specialist
garage.
Fig. 193 Front headlight: Fitting position
of the bulbs
193.
Turn signal light (at the front)
Changing light bulb for turn signal light (at the front)
– Switch the ignition and all lights off.
Remove the headlight  page 222.
–
– Turn the socket in the direction of arrow OPEN (open) and take it out together
with the light bulb for the turn signal light
– Press the defective light bulb into the socket, turn to the left and remove.
– Press a new light bulb into the socket and turn the light bulb to the right as far
as the stop.
– Insert the socket with the changed light bulb into the headlight and secure it by
turning in the direction of arrow CLOSE (close) to the right.
Note
After installing the headlight, the headlight setting must be checked by a specialist
garage.
Fig. 194 Removing the light bulb for the
turn signal light
 fig.
194.