Bernina artista 170 QPE/180 Owner's Workbook page 81

Table of Contents

Advertisement

M
ASTERING
Y
OUR
BERNINA
®
• Select stitch #2 - SW 2mm and SL satin - Tension 1 - Tailor Tack Foot #7.
• Place fabrics right sides together; sew with a
• Sew slowly - adjust motor to ½ speed.
• When finished sewing the seam, pull the two layers firmly apart and press open.
• Change to Open Embroidery Foot #20/20C for better visibility - may need to stabilize the
stitching area to prevent tunneling.
• From the right side, anchor the fagoting to the fabric on either side with a decorative stitch
through the seam allowance. (Stitch #414 and #334 are used in the illustration.) Adjust width
and length as desired; engage Mirror Image as needed.
• Trim any excess seam allowance if needed.
BERNINA
M
Y
ASTERING
OUR
BERNINA
FAGOTING
Fabric:
Firm fabric - 2 pieces, 3 "x 5" each
Needle:
90/14 Embroidery
Thread:
Embroidery
Presser Feet:
Tailor Tack Foot #7 (optional accessory)
Open Embroidery Foot #20/20C
1/10/02
®
®
artista 170 QPE/180
5
/
" seam on a 5" side.
8
artista 170 QPE/180/81

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Artista 170 qpeArtista 180

Table of Contents