Bernina artista 170 QPE/180 Owner's Workbook page 79

M
ASTERING
Y
OUR
BERNINA
®
Make 2 tears in the fabric, about 1" each. Make one hole about ½" round.
1. Select Automatic Mending Stitch #22 for the first tear.
• Attach Reverse Pattern Foot #1/1C.
• Engage the "foot 3" symbol from the function bar.
• Sew the first row, the length of the tear - press the quick reverse button ([the first
length has been programmed).
• Sew the second row, the length of the tear - press the quick reverse button again
(second length programmed).
• Complete the darning program - the machine stops automatically.
2. Select Reinforced Mending Stitch #23 for the second tear.
• Use Automatic Buttonhole Foot #3A/3C this time.
• Insert the needle in the area to the left of the top of the tear.
• Sew the first vertical row - press the quick reverse button and the length is programmed.
• The machine will finish automatically.
3. Manual Darning of the hole with Foot #9.
• Bond the fusible knit interfacing on the wrong side of the hole.
• Select stitch #1 and attach Foot #9. Lower the feed dogs.
• Hoop fabric to prevent distortion. Stitch, moving the hoop without pressure.
BERNINA
M Y
ASTERING OUR
BERNINA
MENDING TEARS AND HOLES
Fabric:
Needle:
Thread:
Presser Feet:
1/10/02
®
®
artista 170 QPE/180
Denim - 4" x 6"
Fusible Knit Stabilizer, 2" x 2"
90/14 Universal or Jeans
To suit the fabric
Reverse Pattern Foot #1/1C,
Automatic Buttonhole Foot #3A/3C,
and Darning Foot #9 (optional accessory)
artista 170 QPE/180/79