Bernina artista 170 QPE/180 Owner's Workbook page 119

M
ASTERING
Y
OUR
BERNINA
®
Altered Memory
Sewing manual page ___
• Select stitch #2
- alter width to 6mm and length to satin
- Needle position far right and Tension to 1
• Select stitch #327
- alter length to 3mm
- Touch the "b" on the function bar; use the down arrow to open the pattern by 5 steps.
• Select stitch #120
- alter tension to 2 (180 only)
• Select stitch #2 again
- all of the alterations are still there
• Touch the "b" on the function bar
- no change to the stitch
- balance is remembered stitch by stitch.
• Select stitch #327 again
- SL is still there
- touch "b" and the balance change is there
• Select stitch #120 again
- the tension alteration is still there (180 only).
• Alter as many stitches as desired.
- Can alter width, length, needle position, tension (180 only) and balance.
- All alterations are remembered until machine is turned off.
CLR vs CLEAR ALL
Owner's manual pages ___ and ___ .
• Select stitch #2 - press the external CLR button – the stitch will revert to its basic setting.
- Clears selected stitch alterations and deletes most functions.
• Touch CLR ALL.
- Clears all altered settings except those changed in the Setup program
- features affected are listed on page___ of the manual.
TENSION (180 only)
Owner's manual page___
• Go to SETUP – select FUNCTION box – place Tension icon on function bars
- An icon is available in the function program in Setup.
- It will not appear on the different function bars unless it is placed there in Setup.
- Touch symbol to access tension screen.
- Tension changes in this mode affect selected stitch only.
- Touch reset to return to basic setting or value chosen in Setup.
BERNINA
M Y
ASTERING OUR
BERNINA
FABULOUS FEATURES EXERCISE
1/10/02
®
®
artista 170 QPE/180
artista 170 QPE/180/119