Bernina artista 170 QPE/180 Owner's Workbook page 114

M
ASTERING
Y
OUR
BERNINA
®
Stitch Settings
Owner's manual page___
• You can permanently change the basic settings of width, length, and needle position for stitches.
Let's Practice
• Select stitch #9 to alter.
• Press the Setup button and the main Setup screen appears.
• Select the Stitch Length/Stitch Width/Needle Position box.
• The Change screen appears over the Stitch screen - alter the width to 2mm, the length to 1mm and
the needle position to far left (needle position is altered with the external button).
• Touch OK to save alterations.
• Touching ESC will close Setup and return to the last selected stitch screen.
• Select stitch #9 - it now reflects the settings you gave it and those settings will remain even after the
machine is turned off.
• The stitch can be returned to basic settings or altered anytime you choose.
Beepers
Owner's manual page___
• You have the ability to apply audio signals to several machine functions.
• Audio signals can be turned off and on at will.
• The number of beeps can be set at 1, 2, or 3.
Let's Practice
• Touch the Setup button - the main setup menu appears.
• Touch the beeper box - the beeper menu appears.
• Select Bobbin Winder Motor box - touch on - touch number box until the number "3" is highlighted.
• Touch OK and the changes are saved. Screen closes and main Setup screen appears.
• ESC will take you out of the beeper menu and back to the main Setup screen and changes will not
be saved.
• Exit Setup - engage the bobbin winder and touch the foot control - the beeper sounds 3 times to let
you know the bobbin winder motor is engaged.
• Select Setup and beepers again.
• Select the Bobbin Winder Motor again - touch off - the audio signal is now turned off for this feature -
remember to touch OK to save changes.
Motor Speed
Owner's manual page___
• Maximum speed is 880 stitches per minute.
Let's Practice
• Touch the Setup button and select the Motor Speed box.
• The motor speed menu opens on top of the stitch screen.
• Touch the arrow to the left of 880 and this number decreases.
• The arrow to the right will increase the number up to 880.
• Each touch will alter the number by 10 stitches per minute.
• Any change in the maximum speed affects all 4 speeds respectively (¼, ½, ¾, 1 - slower or faster at
all 4 levels].
• Touch OK to save the change.
• Touch ESC and you will return to the main Setup menu.
• Touch RESET to return to factory settings.
BERNINA
M Y
ASTERING OUR
BERNINA
1/10/02
®
®
artista 170 QPE/180
artista 170 QPE/180/114