Bernina artista 170 QPE/180 Owner's Workbook page 58

M
ASTERING
Y
OUR
BERNINA
®
• Select the ZigZag stitch #2 - SW 2mm and SL 2mm.
• Position the elastic on the wrong side of the fabric, along one 6" edge.
• Allow a 2" tail of elastic to extend beyond the fabric.
• Using the tail of elastic at the back of the presser foot for a "handle", stretch the elastic
a bit to simulate the leg of an exercise leotard or swimsuit.
Note: This is the same procedure used to do a turned waistband, using wider elastic.
• Sew the elastic to the fabric keeping the edge of the elastic and the edge of the fabric together.
• If stopping midway, use the Needle Down function to hold the elastic and fabric in place.
• Fold the elastic to the wrong side and overstitch the elastic from the right side using Stitch #16
or #17 with a length of 1mm.
• Adjust presser foot pressure and/or stitch length if elastic stretches out as it is sewn.
BERNINA
M Y
ASTERING OUR
BERNINA
TURNED UNDER ELASTIC
Fabric: Lycra - cotton or nylont, 6" x 5"
9" of cotton swimwear elastic, ½" wide
Needle: 80/12 Universal
Thread: All-purpose sewing thread
Presser Foot: Reverse Pattern Foot #1/1C
1/10/02
®
®
artista 170 QPE/180
artista 170 QPE/180/58