Bernina artista 170 QPE/180 Owner's Workbook page 105

M
ASTERING
Y
OUR
BERNINA
®
Row #10 - Pattern Extend
• Stitch maintains its density when enlarged.
• Select stitch #414 and adjust tension for satin stitch.
• Engage Pattern End function 1x and sew one.
• Engage Pattern Extension 2x and sew one.
• Engage Pattern Extension 3x and sew one.
• Touch CLR to cancel alterations.
Row #11 - Double Needle Limitation
• This function restricts the swing of the needle.
• As a safety feature, CLR does not clear the Double Needle Limitation function; CLR ALL does.
• The 170 QPE can use up to a 5mm double needle; the 180 can use up to an 8mm double needle.
• Select stitch #10 and sew for about 1" at preset settings.
• Engage Double Needle Limitation 3mm and sew another inch.
• Touch the Double Needle Limitation again until it says 6mm (180) or 4mm (170 QPE) and sew another 1".
• Clear the Double Needle Limitation and stitch another 1".
Row #12 - Balance
• Same stitch as before - sew about one third the distance at preset and stop.
• Select the Balance symbol from the function bar (b).
• Touch the down arrow until the number 5 is above it.
• Sew the next third.
• Clear the balance change and touch the up arrow until it says 5 above it.
• Sew the last third.
CLR
- Does not undo Needle Down, Motor Speed, or Double Needle
- Affects only the selected stitch.
CLR ALL
- Affects all alterations to stitches, except those made in Setup.
BERNINA
M Y
ASTERING OUR
BERNINA
1/10/02
®
®
artista 170 QPE/180
artista 170 QPE/180/105