Bernina artista 170 QPE/180 Owner's Workbook page 104

M
ASTERING
BERNINA
®
Y
artista 170 QPE/180
OUR
BERNINA
®
Row #6 - Pattern Begin/Pattern End
• Select Stitch #416.
• Using Open Embroidery Foot #20/20C, sew until the machine stops.
• Sew 1½ scallops; raise the foot and push the fabric back about 1"
• Select Pattern Begin and repeat.
• This function does not stay highlighted once the pattern is begun.
• Engage Pattern End 2x.
• Sew until the machine stops.
• Touch Clr to cancel alterations.
Row #7 - Securing
• Select Stitch #119.
• Select Pattern End 1x and the Securing function.
• Sew until the machine stops. The Securing function takes 3 stitches at the beginning and end of the design.
• Raise the presser foot and push the fabric back about 1".
• Select Stitch #308.
• Select Pattern End 3x and the Securing function.
• Sew until the machine stops. It secured at the beginning of the first pattern and at the end of the third.
• Touch Clr to cancel alterations.
Row #8 - Half Pattern
• Use Reverse Pattern Foot #1/1C.
• Select stitch #406 - Pattern End 1x - Needle Down.
• Sew until the machine stops.
• Move the fabric down to the left of the 3 stars from row #7.
• Select Pattern Begin and then Half Pattern.
• Place the foot about 1½" to the right of the 3 stitches.
• Sew until the machine stops with the needle down.
• Raise the foot and turn the fabric ¼ turn clockwise.
• Sew until the machine stops with the needle down.
• Raise your foot off the foot control and then touch it again and sew until it stops.
• Raise the presser foot and turn the fabric 1/4 of a turn clockwise again.
• Repeat two and one half more times until the design is completed.
• Go back and select stitch #119 - Half Pattern and Pattern End 1x.
• Sew - only one leaf is sewn this time.
• Touch CLR to cancel alterations.
Row #9 - Mirror Image
• Use Reverse Pattern Foot #1/1C
• Mirror Image affects the stitch as it appears on the screen. It may appear differently in the memory bar than
it does in the stitch box.
• Select stitch #907 - Pattern End 1x - sew one turtle.
• Select the side-to-side Mirror Image symbol and sew one more turtle.
• Clear the Mirror Image.
• Select top-to-bottom Mirror Image and sew one more.
• Both Mirror Images can be used at the same time.
• Touch CLR to cancel alterations.
BERNINA 1/10/02
®
M Y artista 170 QPE/180/104
ASTERING OUR