Bernina artista 170 QPE/180 Owner's Workbook page 47

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.____
• Fold the fabric in half to 3" x 6".
• Mark two lines perpendicular to the fold, spacing them about 2" apart.
• Position the foot over the first line, aligning the fold of the fabric with the
• Select the Standard Buttonhole #57.
• Open the button measuring screen by touching the button symbol on the function bar; a scale appears
on the screen.
• Hold a button against the scale at the bottom left corner of the screen.
• Use the external stitch width knob to move the vertical line on the screen; the line should be exactly at
the right edge of the button. The buttonhle size is shown in mm above the horizontal line.
Note: 2mm are added automatically to accommodate thickness of the button.
• Sew the buttonhole on the first line.
• Sew a memorized buttonhole on the second line.
• Trim and mount sample.
BERNINA
M Y
ASTERING OUR
BERNINA
BUTTONHOLE LENGTH
ON-SCREEN MEASURING
Fabric: Heavy flannel, 6" x 6"
Two 10" lengths of gimp cprd
Stabilizer: 1 piece, 3" x 6"
Needle: 90/14 Embroidery
Thread: 30 weight cotton embroidery
Presser Foot: Standard Buttonhole Foot #3/3C and
Automatic Buttonhole Foot #3A or #3C
1/10/02
®
®
artista 170 QPE/180
5 / " marking behind the foot.
8
artista 170 QPE/180/47