Bernina artista 170 QPE/180 Owner's Workbook page 116

M
ASTERING
Y
OUR
BERNINA
®
Sewing Light
Owner's manual page___
• The sewing light can be set to be on or off.
Let's Practice
• Press the Setup button and touch the Sewing Light box.
• Touch on and the light will be on continuously when the machine is on - touch off and the light will
not come on at all.
• OK confirms changes and ESC takes you back to the main Setup menu without saving any changes.
Service
Owner's manual page___
• The service function of the Setup program gives information about the version of software in your machine
and embroidery module.
• Calibration adjustments can be made to the screen and hoop adjustments for the embroidery module. (The
embroidery module is an optional unit.)
Let's Practice
• Press the Setup button and touch the Service box.
• Version - Owner's manual page___
- Select the Version box. Version screen appears - this shows the software
version number next to the icon of the machine and also the version number
of the embroidery module, if one is connected, next to the icon of the module.
The two versions should be the same for optimal results.
- Touch ESC to return to the previous screen.
• Screen Calibration - Owner's manual page___
- Calibrating the screen is important for making on-screen selections by
touch. If the screen is not calibrated, you might touch one selection and
the machine reads one next to it.
Note: The screen is calibrated at the factory, but shipping
and transporting may affect it. The screen only needs adjusting
if the on-screen buttons do not react properly when touched.
- If needed, select the "screen" box - the calibration screen appears -
press each black dot in exactly the middle (use the point of a
mechanical pencil - without lead) one after the other - it doesn't matter
which one is touched first - the machine will beep to let you know the dots
have been engaged. When both have been engaged the screen will revert
automatically to the previous screen.
Note: Take care to touch the black dots ONLY. If the screen
is miscalibrated by touching any other area, it may require a
technical adjustment by an authorized technician.
• Embroidery Hoop Adjustment - Owner's manual page___
- This adjustment calibrates the needle to the center of the embroidery hoop. The hoop
adjustment can only be activated if the embroidery module is attached.
Note: This exercise will be done in the embroidery module owner's class.
- As with other screens - OK confirms changes and saves them
- ESC returns you to the previous screen without saving.
BERNINA
M Y
ASTERING OUR
BERNINA
1/10/02
®
®
artista 170 QPE/180
artista 170 QPE/180/116