Nortel T7406 Installation Manual page 13

3 Charge the battery pack in the handset for a minimum of three hours.
4 Trickle charge a spare battery pack in the back battery port of the charger for 12 hours.
The following diagrams demonstrate where the battery pack fits onto a handset, and how to trickle
charge the spare battery pack.
Battery
pack
Note: If you
are using a
leather cover,
it must be
removed
before you
put your
handset in
charger.
Indicator lights
Installing a Battery Pack into the Handset
1. Position the battery pack in the
bottom position on the back of
the handset.
2. Snap the top of the battery pack
into place.
Charging the Handset
1. Slide the handset into the
charger. Make sure the handset
and charger contacts touch.
2. The handset charge indicator
light turns on. The battery pack
indicator light is red while it is
charging.
The battery pack fully charges in
approximately three hours.
When the battery pack is fully
charged, the indicator light turns
green.
Note: Charging begins as soon as the
handset is placed in the base
station.
3. Slide the spare battery pack into
the back battery port. Make sure
the battery pack and charger
contacts touch.
Chapter 1 About your T7406 Phone
T7406 Cordless Handset Installation Guide
13