Makita LS1017L Technical Information page 9

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Switch (cont.)
DISASSEMBLING
(4) Unscrew eight M4x16 Tapping screws and remove Left handle.
Right handle
Motor housing
(5) Remove Brake system switch key, Switch lock bracket, Switch lock plate and Switch handle when exchanging the Switch.
Brake system switch key
Right handle
Switch lock bracket
ASSEMBLING
(1) Attach Switch lock plate with Switch handle spring to Right handle. And attach Switch handle.
Switch lock plate
Switch handle
Motor housing
Brake system switch
Electric switch
Switch lock plate
Switch handle
Be sure that Switch handle
spring is set securely.
Right handle
Left handle
Fig. 10
Be careful that the spring
will pop out.
Switch lock plate
Fig. 11
Switch handle can be easily assembled by
widening it so that the protrusion on Switch
lock plate is fitted into Switch handle.
Switch lock plate
Fig. 12
P 6/ 45
M4x16 Tapping screw
Switch handle spring
Switch handle
Protrusion
Switch handle spring