R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Switch (cont.)
ASSEMBLING
(2) Attach Switch lock bracket to Right handle.
Brake system switch key
Switch lock bracket
(3) Assemble Left handle to Right handle by tightening eight M4x16 Tapping screws.
Right handle
Motor housing
(4) Assemble Motor housing and Handle section to the machine by reversing the disassembly procedure.
[3] -2. Starter
DISASSEMBLING
(1) Unscrew two M4x16 Tapping screws and remove Motor rear cover. And disconnect cables to remove Soft starter.
M4x16 Tapping screw
Set Switch lock bracket so that its protrusion is
between the rib on Handle L and Switch handle.
Rib on Handle L
Protrusion
Switch handle
Motor housing
Motor rear cover
Right handle
Brake system switch
Switch lock plate
Fig. 13
Left handle
Fig. 14
To make assembly easier, mark connecting point
with permanent marker when removing Terminal.
Soft starter
Fig. 15
P 7/ 45
M4x16 Tapping screw
Cables