Makita LS1017L Technical Information page 33

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -10. Working table and Base (cont.)
ASSEMBLING
(1) Set Lock spring and Lock pin to Lock shaft B and
attach to Working table.
Lock spring Lock pin
Working table
Fig. 114
(3) Fix Lock plate A with two M4x12 Cross head screws.
Lock plate A
Fig. 116
Note
Do not tighten Miter locking handle too much,
or it may lead to the breakage of Lock plate B.
Miter locking handle
Fig. 118
Lock shaft B
M4x12 Cross head screw
Lock plate B
(2) Press Lock shaft B in the direction of the arrow
as shown below and set Press plate.
Lock pin
Lock spring Lock shaft B
Notch
Press plate
Fig. 115
(4) Fix Working table locking bracket and Lock plate B
with two M4x15 Cross head screws.
Lock plate B
Working table
locking bracket
Fig. 117
P 30/ 45
Compress Lock spring
by pressing Lock
shaft B.
Set lock pins
on Lock shaft B
into the notches
on Press plate.
M4x15 Cross head screw