R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -10. Working table and Base (cont.)
DISASSEMBLING
(7) Remove Pivot shaft by tapping it with a plastic hammer.
Pivot shaft
Fig. 107
(9) Remove Miter locking handle by turning it
counterclockwise.
Miter locking handle
Fig. 109
(11) Unscrew two M4x15 Cross head screws and remove
Lock plate B and Working table locking bracket.
Lock plate B
Working table
locking bracket
Fig. 111
(13) Remove Press plate, Lock spring and Lock shaft B.
Press plate
Lock spring
Plastic hammer
M4x15 Cross head screw
Lock shaft B
(8) Remove two Friction plates.
Friction plate
(10) Remove Lock shaft A.
(12) Unscrew two M4x12 Cross head screws and remove
Lock plate A.
Lock plate A
Lock shaft B
Lock spring
Lock pin
Fig. 113
P 29/ 45
Fig. 108
Lock shaft A
Fig. 110
M4x12 Cross head screw
Fig. 112
Compress Lock spring
by pressing Lock
shaft B.
Release lock pins
on Lock shaft B
from the notches
on Press plate.
Notch