R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -9. Support arm (cont.)
DISASSEMBLING
(4) Unscrew M4x12 Cross head screw and remove
Bevel pointer.
Bevel pointer
Fig. 80
(6) Remove two Big flat washer 10x26x2.5, Surface bearing
and Bowl type plate.
Big flat washer 10x26x2.5
Bowl type plate
Fig. 82
(8) Remove Support arm and the following parts.
Support arm
Working table
Friction ring
Fig. 84
M4x12 Cross head screw
Surface bearing
Flat washer 10
M10 Locknut
Clamp plate
(5) Remove Hex nut.
Fig. 81
(7) Remove M10 Locknut.
M10 Locknut
Fig. 83
(9) Unscrew three M6x20 H.S.bolts and remove
45° Limit bracket.
45° Limit bracket
45° Limit bracket
Fig. 85
P 24/ 45
Hex nut
Support arm
M6x20 H.S.bolt