R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Gear box (cont.)
ASSEMBLING
(3) Fix Bearing press plate with two M4x10 Countersunk
head bolts.
Bearing press plate
M4x10 Countersunk head bolt
Fig. 44
(5) Fix Retaining ring 14 to Output shaft with 1R291.
1R291
Fig. 46
Apply thinly
on whole surface.
Output shaft
Retaining ring 14
Gear box
Liquid gasket (ThreeBond 1215)
(4) Set Gear to Output shaft.
(6) Attach Bearing cover to Gear box.
Lubrication
After Gear box is attached,
apply grease while turning Gear.
Fig. 48
P 15/ 45
Output shaft
Gear
Fig. 45
Gear box
Bearing cover
Fig. 47