Rear Seats; Removing The Seat Cushion; Folding The Seat; Returning The Seat Back To Its Original Position - CITROËN C5 2013 Owner's Manual

REAR SEATS

3
Bench seat, the left-hand (2/3) or
right-hand (1/3) section of which
can be folded to adapt the boot load
space.

Removing the seat cushion

 Move the corresponding front
seat forwards if necessary.
 Raise the front of the seat cush-
ion 1 .
 Tilt the seat cushion 1 fully
against the front seat.
 Remove the seat cushion 1 from
its fi xings by pulling upwards.
60
C O M F O R T
Refitting the seat cushion
 Position the seat cushion 1 verti-
cally in its fi xings.
 Fold down the seat cushion 1 .
 Press on the seat cushion to se-
cure it.

Folding the seat

In order to fold a rear seat without
any risk of damage, always start
with the seat cushion, never with
the seat back:
 move the corresponding front
seat forwards if necessary,
 raise the front of the seat cushion 1 ,
 tilt the seat cushion 1 fully against
the front seat,
 check that the seat belt is posi-
tioned correctly on the side of
the seat back,
 lower or remove the head re-
straints if necessary,
 pull the control 3 forwards to re-
lease the seat back 2 ,
 tilt the seat back 2 .
The seat cushion 1 can be removed
to increase the loading volume.
Returning the seat back to its
original position
When returning the rear seat back to
its original position:
 put the seat back 2 in the upright
position and secure it,
 fold the seat cushion 1 ,
 refi t the head restraints or put
them back in place.
When returning the rear seat back
to its original position, take care not
to trap the seat belts and ensure
that their buckles are positioned cor-
rectly.
The red indicator on the control 3
should no longer be visible; if it is,
push the seat fully back.