Changing Dipped Beams; Changing The Directional Lighting; Changing Direction Indicators - CITROËN C5 2013 Owner's Manual

Changing dipped beams

 Lift up the pegs A to remove the
cover on the headlamp.
 Remove the protective cap C .
 Disconnect the connector by
pressing it between the thumb
and index fi nger.
 Free the bulb from its two metal
clamps.
 Take out the bulb.
 Replace the bulb, exerting a
slight axial force.
 Reconnect the connector, until it
is all the way in.
11
 Replace the protective cap C .
 Replace the cover and fi x it in
place using the pegs A .
170
P R A C T I C A L I N F O R M A T I O N

Changing the directional lighting

 Lift up the pegs A to remove the
cover on the headlamp.
 Remove the protective cap D .
 Disconnect the connector by
pressing it between the thumb
and index fi nger.
 Free the bulb from its two metal
clamps.
 Take out the bulb.
 Replace the bulb, exerting a
slight axial force.
 Reconnect the connector, until it
is all the way in.
 Replace the protective cap D .
 Replace the cover and fi x it in
place using the pegs A .

Changing direction indicators

 Remove the fi xing screw of cover
A using a torx tool, tip the cover
over and remove.
 Remove the fi xing screw of lamp
B using a torx tool and pull the
headlamp unit to remove it from
the bumper.
 Detach the bulb C by pressing
on bars 1 and 2 .
 Disconnect the connector (pull
whilst pressing on
tongue using a fl at screwdriver).
 Replace the bulb.
 Connect the connector (push the
grey tongue in well).
 Replace the headlamp unit in the
bumper.
 Screw the headlamp unit in.
 Position the cover using
guides and screw in.
Bulbs: HP24 W
the grey
its