Comfort
Rear seats
Bench seat with fixed one-piece cushion and split backrest (right hand 2/3, left hand 1/3) to adjust the load space in the boot.
Rear head restraints
These have one position for use (up) and a
stowed position (down).
They can also be removed.
To remove a head restraint:
F release the backrest using control 1,
F tilt the backrest 2 slightly forwards,
F pull the head restraint upwards to the stop,
F then, press the lug A.
With passengers in the rear seats,
never drive with the head restraints
removed; they must be in place and
correctly adjusted.
56
Folding the backrest
F Move the corresponding front seat forward if necessary.
F Check that the seat belt is positioned correctly on the
side of the seat backrest.
F Place the head restraints in the low position.
F Pull control 1 forwards to release the seat
backrest 2.
F Fold the seat backrest 2 on to the cushion.
Repositioning the seat backrest
F Straighten the seat backrest 2 and secure it.
F Check that the red indicator, located next to
the control 1, is no longer visible.
When repositioning the seat backrest,
take care not to trap the seat belts.