Oil Level Gauge Fault - CITROËN C5 2013 Owner's Manual

I N S T R U M E N T S a n d C O N T R O L S
Maintenance indicator zero reset
After each service, the maintenance
indicator must be reset to zero.
Your CITROËN technician resets the
indicator to zero after each service.
However, if you do your own serv-
icing, the procedure for resetting to
zero is as follows:
 switch off the ignition,
 press and hold the trip distance
recorder zero reset button,
 switch on the ignition; the dis-
tance recorder display begins a
countdown,
 when the display indicates "=0" ,
release the button; the spanner
disappears.
Following this operation, if you wish
to disconnect the battery, lock the
vehicle and wait at least fi ve minutes
for the zero reset to be taken into ac-
count.
Engine oil level indicator
System which informs the driver of
the validity or invalidity of the engine
oil level.
This information is indicated for a
few seconds when the ignition is
switched on, after the service infor-
mation.
The level read will only be correct if
the vehicle is on level ground and
the engine has been off for more
than 15 minutes.
Oil level correct
Lack of oil
This is indicated by displaying of the
message "Oil level incorrect".
If the lack of oil is confi rmed by a
check using the dipstick, it is essential
that the level is topped up to prevent
damage to the engine.

Oil level gauge fault

This is indicated by displaying of the
message "Oil level measurement not
valid". Consult a CITROËN dealer.
1
33