DRAINING THE DIESEL FUEL
FILTER
Protective cover
Removal of the cover
HDi 138 engine
Remove the protective cover by
fi rst unclipping at 3 , then 1 and 4.
Unclip at 2 by pulling towards
you, then lift up.
HDi 110, HDi 173 and V6 HDi 208
engines
Pull the protective cover upwards
to remove it.
C H E C K S
Refi tting
Firstly clip in at 2 .
Lower and centre the cover.
Clip in at 3 and 4 , pushing verti-
cally and gently from the rear.
Clip in at 1 pushing vertically.
Draining water from the fuel
filter
Drain regularly (at each oil change).
To drain the water, slacken the bleed
screw or the water in diesel fuel sen-
sor, located at the base of the fi lter.
Continue until all the water has
fl owed out.
Then retighten the bleed screw or
the water detection sensor.
10
151