SNOW GUARD *
Moveable device which prevents the
accumulation of snow by the radia-
tor cooling fan.
Fitting
Bring the 2 sections of the snow
guard up to the upper and lower
sections of the front bumper.
Press on the surround to clip in
one by one the fi xing clips.
Remove
Using a screwdriver, lift it up to
detach each fi xing clip one by
one.
It is essential to remove the snow guard:
-
When
the
outside
exceeds 10 °C,
-
When towing,
-
When driving at speeds of over
11
75 mph (approximately 120 km/h ).
190
P R A C T I C A L I N F O R M A T I O N
temperature
Before fi tting
After fi tting
* According to country.