Table of Contents
Advertisement
68
EN
Edit From A
Camcorder
A
If the camcorder has no S-VIDEO output connector:
Recorder
AUDIO input
VIDEO
input
Audio cable (not provided)
Video cable (not provided)
VIDEO OUT
AUDIO OUT
Camcorder
Player
EDIT
B
If the camcorder has an S-VIDEO output connector:
S-VIDEO input
AUDIO input
Audio cable (not provided)
S-Video cable (not provided)
S-VIDEO OUT
AUDIO OUT
Camcorder
Player
EDIT
You can use a camcorder as the source player and your
unit as the recording deck.
Slide the TV/S-VHS/DVD switch to the right.
A
A If the camcorder has no S-VIDEO output connector:
— connect the camcorder's AUDIO OUT and VIDEO
OUT connectors to the unit's front panel AUDIO and
VIDEO input connectors.
B If the camcorder has an S-VIDEO output connector:
— connect the camcorder's AUDIO OUT and
S-VIDEO OUT connectors to the unit's front panel
AUDIO and S-VIDEO input connectors.
When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your unit.
When a Master Edit Control-equipped JVC camcorder is used, the
To PAUSE
camcorder is capable of controlling the unit. Refer to the camcorder's
connector
instruction manual for operating procedure.
B
On the unit
Mini-plug cable
Press S-VHS/DVD repeatedly so that the S-VHS indicator
(not provided)
lights up.
(JVC camcorder
only)
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
C
Press AUX (number key "0") and/or PR to select "F-1" for
the AUDIO and VIDEO input connectors, or "S-1" for the
AUDIO and S-VIDEO input connectors, depending on
the connectors being used.
D
Recorder
See "PICTURE CONTROL" on page 77.
E
Engage the Play mode of the camcorder.
F
To PAUSE
connector
Engage the Record mode of the unit.
NOTES:
All necessary cables can be obtained from your dealer.
When you select "EDIT" to dub tapes in step D, be sure to select
Mini-plug cable
"AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you finish
(not provided)
dubbing the tapes.
(JVC camcorder
only)
IMPORTANT
To edit, both the player and the recorder must be of the same
colour system. Select the appropriate colour system. (
78)
PAL, SECAM and NTSC camcorders can be used as a player for
editing.
For more information on multi-system compatibility, refer to
"Information on Multi-System Compatibility (S-VHS deck only)"
(
EDITING (S-VHS DECK)
Make connections.
Select the S-VHS deck.
Set the unit's input mode.
Set the edit mode.
Start the camcorder.
Start the unit.
pg. 88)
pg. 77,
Advertisement
Table of Contents
