Table of Contents
Advertisement
G-
™/S
CODE
The G-
timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer
CODE
record function. Simply key in the G-
timer is automatically programmed.
You have to set Guide Program numbers, which are assigned to each station for purposes of S
stations stored in your unit's memory to get proper results.
Before G-
setup you must have performed Auto Set Up (
CODE
IMPORTANT
After setting the Guide Program Numbers, channel positions may be incorrect if you stored or skipped channels. In this case, re-
perform Guide Program Number setting.
INFORMATION
G-
and S
V
are different trademarks used to represent the same easy recording feature, but only the term G-
CODE
HOW
IEW
system will be used in the instructions. If you use the S
Turn on the TV and select the video channel (or
AV mode).
Guide Program Number Set
A
Access the Main Menu screen.
Press SET UP MENU.
B
Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to "INITIAL
SET", then press OK or e.
C
Access the Guide Program Set screen.
Press rt to move the highlight bar (pointer) to
"G-CODE/SHOWVIEW SETUP", then press OK or e.
D
Enter the Guide Program number.
Press rt or number keys to
enter the Guide Program
number for the desired station
as shown in the TV listings.
Then press OK or e.
V
HOW
IEW
number for the TV programme you wish to record (found in most TV listings) and the unit's
CODE
V
HOW
G-CODE/SHOWVIEW SETUP
GUIDE PROG
TV PROG
2
5
[0–9] OR [ / ] : SELECT
[MENU] : EXIT
(Example) When inputting the
Guide Program
number 2 for RTR.
™ System Setup
pg. 16).
system, follow the same instructions listed for the G-
IEW
E
Enter the receiving channel position number.
Then press rt or number keys
to input the number of the
unit's channel position on
which the Guide Program
number's broadcast is received
by the unit. Then press OK or
e.
If the satellite broadcast is
received on your unit's auxiliary
channel "L-1", select "L-1" for
the channel position.
Repeat steps D and E as necessary.
F
Return to the normal screen.
Press SET UP MENU.
Guide Program Number
"Guide Program (GUIDE PROG) number" refers to the
assigned TV station numbers, according to broadcast area,
for the G-
timer recording. The Guide Program numbers
CODE
can be found in most TV listings.
V
timer programming, for all the
HOW
IEW
CODE
G-CODE/SHOWVIEW SETUP
GUIDE PROG
2
[0–9] OR [ / ] : SELECT
[MENU] : EXIT
(Example) If RTR is received on
channel position 2.
31
EN
CODE
system.
TV PROG
5
Advertisement
Table of Contents
