Table of Contents
Advertisement
58
EN
Edit From A
Camcorder
A
If the camcorder has no S-VIDEO output connector:
Recorder
AUDIO input
VIDEO
input
Audio cable (not provided)
Video cable (not provided)
VIDEO OUT
AUDIO OUT
Camcorder
Player
EDIT
B
If the camcorder has an S-VIDEO output connector:
S-VIDEO input
AUDIO input
Audio cable (not provided)
S-Video cable (not provided)
S-VIDEO OUT
AUDIO OUT
Camcorder
Player
EDIT
You can use a camcorder as the source player and your
unit as the recording deck.
Slide the TV/S-VHS/DVD switch to the right.
A
A If the camcorder has no S-VIDEO output connector:
— connect the camcorder's AUDIO OUT and VIDEO
OUT connectors to the unit's front panel AUDIO and
VIDEO input connectors.
B If the camcorder has an S-VIDEO output connector:
— connect the camcorder's AUDIO OUT and
S-VIDEO OUT connectors to the unit's front panel
AUDIO and S-VIDEO input connectors.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your unit.
● When a Master Edit Control-equipped JVC camcorder is used,
To PAUSE
the camcorder is capable of controlling the unit. Refer to the
connector
camcorder's instruction manual for operating procedure.
B
On the unit
Mini-plug cable
(not provided)
Press S-VHS/DVD repeatedly so that the S-VHS indicator
(JVC camcorder
lights up.
only)
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
C
Press AUX (number key "0") and/or PR to select "F-1" for
the AUDIO and VIDEO input connectors, or "S-1" for the
AUDIO and S-VIDEO input connectors, depending on
the connectors being used.
D
Recorder
See "PICTURE CONTROL" on page 71.
E
Engage the Play mode of the camcorder.
F
To PAUSE
connector
Engage the Record mode of the unit.
NOTES:
● All necessary cables can be obtained from your dealer.
Mini-plug cable
● When you select "EDIT" to dub tapes in step D, be sure to
(not provided)
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
(JVC camcorder
after you finish dubbing the tapes.
only)
EDITING (S-VHS DECK)
Make connections.
Select the S-VHS deck.
Set the unit's input mode.
Set the edit mode.
Start the camcorder.
Start the unit.
Advertisement
Table of Contents
