JVC HR-XVC33U Instructions Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. DVD VCR Combo
  5. HR-XVC33U
  6. Instructions manual

JVC HR-XVC33U Instructions Manual

Dvd player and video cassette recorder
Hide thumbs Also See for HR-XVC33U:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
DVD PLAYER &
VIDEO CASSETTE RECORDER
HR-XVC33U
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
LPT0853-001A

Advertisement

Table of Contents
loading

Related Manuals for JVC HR-XVC33U

Summary of Contents for JVC HR-XVC33U

  • Page 1: Dvd Player

    DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC33U For Customer Use: Enter below the Model No. and Serial No. which are located on the INSTRUCTIONS rear of cabinet. Retain this information for future reference. Model No. Serial No. LPT0853-001A...
  • Page 2 CAUTION: Dear Customer, Thank you for purchasing the JVC DVD player & VHS video THIS PRODUCT USES A LASER SYSTEM. cassette recorder. Before use, please read the safety USE OF CONTROLS OR ADJUSTMENTS OR information and precautions to ensure safe use of your new PERFORMANCE OF PROCEDURES OTHER THAN unit.
  • Page 3 When the equipment is installed in a cabinet or a shelf, MOISTURE CONDENSATION make sure that it has sufficient space on all sides to allow Moisture in the air will condense on the unit when you for ventilation (10 cm or more on both sides, on top and move it from a cold place to a warm place, or under at the rear.) extremely humid conditions—just as water droplets form...
  • Page 4 IMPORTANT PRODUCT SAFETY 5. Ventilation Slots and openings in the cabinet are provided for ventilation. To INSTRUCTIONS ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. Do not block the openings by placing the product on a bed, Electrical energy can perform many useful functions.
  • Page 5 SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a marked Do not place this product on an unstable cart, stand, tripod, change in performance and you are unable to restore normal bracket, or table.

  • Page 6: Table Of Contents

    CONTENTS DISC INFORMATION EDITING (VCR DECK) About Discs ............7 Edit From A Camcorder ........68 Edit To Or From Another Video Recorder ..69 INDEX Dubbing (from DVD to VCR) ......70 EDITING (DVD DECK) INSTALLING YOUR NEW UNIT Digital Audio Dubbing ........

  • Page 7: Disc Information

    DISC INFORMATION Unplayable Discs About Discs The following types of discs cannot be played using this unit. Do not attempt to play back any kind of disc that is damaged (cracked, warped, or repaired with adhesive tape) or discs in unusual shapes (heart-shaped, octagonal, or other forms).
  • Page 8 DISC INFORMATION (cont.) DVD VIDEO Marks File Structure of Discs DVD VIDEO Sometimes marks are printed on a DVD disc and/or on its packaging to indicate information regarding the contents and Typically, DVD VIDEO discs are made up of larger units called functions of a disc.

  • Page 9: Care And Handling Of Discs

    Placing a Disc Care and Handling of Discs How to handle discs Open the disc tray. When handling a disc, do Press OPEN/CLOSE (x) on the DVD deck to open the not touch the surface of the disc tray. disc. Since discs are made of plastic, they are easily damaged.

  • Page 10: Index

    INDEX FRONT VIEW A Power Button (POWER (1)) K Video/Audio Input Connectors (VIDEO/AUDIO) pg. 18 B VCR Indicator pg. 28, 33 pg. 68 C VHS Cassette Loading Slot L Remote Sensor D VCR/DVD Button M Front Display Panel pg. 28, 33, 42 pg.

  • Page 11: Rear View

    REAR VIEW A Region Number Label F Digital Audio Output Connector pg. 7 B AC Power Cord pg. 14 (DIGITAL AUDIO OUT) pg. 71 C S-video Output Connector (S VIDEO OUTPUT)* G Audio Output Connectors (AUDIO OUTPUT pg. 15 (L/R))* * This connector is only for DVD deck only.
  • Page 12 INDEX (cont.) ON-SCREEN DISPLAY (VCR deck) If you press DISPLAY on the Remote when “SUPERIMPOSE” is set to “ON” ( pg. 76), various operational indicators appear on the TV screen. For On-screen display for DVD deck, refer to “Using the on-screen bar” ( pg.
  • Page 13 48 The Remote can operate most of your unit’s functions, as well Title Button (TITLE) pg. 64 as basic functions of TV sets of JVC and other brands. F Start Time Button (START +/–) pg. 36 pg. 73) Repeat Button (REPEAT) pg.

  • Page 14: Installing Your New Unit

    INSTALLING YOUR NEW UNIT Basic Connections Connect the unit to TV. The connection method you use depends on the type of TV you have. Antenna or Cable RF Connection 8 To connect to a TV with NO AV input connectors — Coaxial cable A Disconnect the TV antenna from the TV.

  • Page 15: S-Video Connection (Dvd Deck Only)

    8 To connect to a TV with S-VIDEO/AUDIO input S-VIDEO connectors . . . Connection Connect the unit to TV. A Connect the antenna, unit and TV as per “AV Connection”. ( pg. 14) B Connect the unit’s S VIDEO OUTPUT (DVD) (DVD deck only) connector to the TV’s S-VIDEO input connector.

  • Page 16: (Dvd Deck Only)

    INSTALLING YOUR NEW UNIT (cont.) 8 To connect to a TV with component video input Component Video connectors . . . Connection Connect the unit to TV. A Connect the aerial, unit and TV as per “AV Connection”. ( pg. 14) B Connect the unit’s COMPONENT VIDEO OUT (DVD deck only) connectors to the TV’s component video input...

  • Page 17: Initial Settings

    INITIAL SETTINGS This unit sets the clock and tuner channels automatically Plug & Play Set when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting. Auto Clock Set/Auto Tuner Set The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels.

  • Page 18: Monitor Set (Dvd Deck)

    INITIAL SETTINGS (cont.) Monitor Set Turn on the unit. Press POWER (1). (DVD deck) Select the DVD deck. You can select the monitor type depending the TV used On the unit when you play back DVD VIDEO discs recorded for Press VCR/DVD repeatedly so that the DVD indicator wide-screen TVs.
  • Page 19 * The default setting is bold in the table below. Pan&Scan/Letter Box In general, DVD VIDEO disc are produced for a wide-screen 8 MONITOR TYPE TV with 16:9 aspect ratio. 16:9 NORMAL (Wide television conversion): Material with this ratio will not fit to a TV with 4:3 aspect Select this when the aspect ratio of your TV is ratio.

  • Page 20: Language

    INITIAL SETTINGS (cont.) On-screen Language Set (VCR deck) Language This VCR deck offers you the choice to view on-screen messages in 3 different languages. Turn on the TV and select the VCR channel (or AV Turn on the unit. mode). Slide the TV/VCR/DVD switch to the right.
  • Page 21 On-screen Language Set (DVD deck) This DVD deck offers you the choice to view on-screen messages in 3 different languages. You can change the language setting manually as required. Turn on the unit. Press POWER (1). Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up.
  • Page 22 INITIAL SETTINGS (cont.) Menu/Audio/Subtitle Language Set (DVD deck only) Some DVD discs contain the DVD menu display, audio, subtitle in the multiple languages. With these discs, you can set the default language as you like. The procedure shows how to set “MENU LANGUAGE” on the DVD Set Up menu screen as an example.

  • Page 23: Language Code List

    Language Code List Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Russian Ameharic Hebrew Kinyarwanda Arabic Yiddish Sanskrit Assamese Javanese Sindhi Aymara Georgian Sangho Azerbaijani Kazakh Serbo-Croatian Bashkir Greenlandic Singhalese Byelorussian Cambodian Slovak Bulgarian Kannada Slovenian Bihari Korean (KOR) Samoan Bislama Kashmiri Shona...

  • Page 24: Clock Set

    INITIAL SETTINGS (cont.) Perform clock setting only if the clock has not been set Clock Set correctly by the Plug&Play setting. Preparations Turn on the TV and select the VCR channel (or AV mode). Turn on the unit. Slide the TV/VCR/DVD switch to the right. Press POWER (1).

  • Page 25: Manual Clock Set

    Semiauto Clock Set Complete the Semiauto Clock Set. You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. First follow steps A to E in Press SET UP MENU to return to normal screen. “Preparations” ( pg. 24), then go to the following steps. NOTE: IMPORTANT The time set previously will be erased when “AUTO CLOCK”,...

  • Page 26: Tuner Set

    INITIAL SETTINGS (cont.) Auto Channel Set Tuner Set Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting. Turn on the TV and select the VCR channel (or AV Turn on the unit. mode). Slide the TV/VCR/DVD switch to the right.

  • Page 27: Manual Channel Set

    Manual Channel Set You can add the channels you want or delete the channels you do not want manually. Turn on the unit. Press POWER (1). Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up.

  • Page 28: Operations On Vcr Deck

    OPERATIONS ON VCR DECK Basic Playback Load a cassette. Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is Turn on the TV and select the VCR channel (or AV pointed toward the unit.

  • Page 29: Playback Features

    Still Picture/Frame-By-Frame Playback Features Playback Pause during playback. ● Turn on the TV and select the VCR channel (or AV Press PAUSE (9). mode). ● If there is vertical jitter, press CH +/– on the Remote to correct ● Slide the TV/VCR/DVD switch to the right. the picture.

  • Page 30: Index Search

    OPERATIONS ON VCR DECK (cont.) Index Search Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the unit is in the Stop mode.

  • Page 31: Repeat Playback

    Next Function Memory The Next Function Memory “tells” the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode. a- For Automatic Start Of Playback Press REW (3), then press PLAY (4) within 2 seconds.

  • Page 32: Manual Tracking

    OPERATIONS ON VCR DECK (cont.) Manual Tracking Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the CH buttons. Override automatic tracking. During playback, press SP/EP on the Remote. Adjust the tracking manually.

  • Page 33: Basic Recording

    Basic Recording Load a cassette. Insert a cassette with the record safety tab intact. The unit’s power comes on automatically and the counter is reset to 0:00:00. Turn on the TV and select the VCR channel (or AV mode). Select the VCR deck. Slide the TV/VCR/DVD switch to the right.

  • Page 34: Recording Features

    OPERATIONS ON VCR DECK (cont.) Record One Program While Watching Recording Features Another If your unit is connected to the TV via the AV connection, press TV/VCR. The unit’s VCR indicator and the TV Turn on the TV and select the VCR channel (or AV broadcast being recorded disappear.
  • Page 35 Elapsed Recording Time Indication Set the counter display. Press DISPLAY until a counter reading appears on the front display panel. Reset the counter. Press C.RESET before starting recording or playback. The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs.

  • Page 36: Express Timer Programing

    OPERATIONS ON VCR DECK (cont.) Example: To timer-record the program from 8:00 to Express Timer 10:00 on 24th December, on channel 12. Programing Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. Before performing Express Timer Programing: On the Remote Make sure that the unit’s built-in clock is set properly.
  • Page 37 NOTES: Enter the channel position. You can program this unit to timer-record as many as 8 programs. If you try to program the unit to record a ninth, Press CH +/–. “PROGRAM FULL” appears on the TV screen. To record the extra program, you must first cancel any unnecessary programs.
  • Page 38 OPERATIONS ON VCR DECK (cont.) Check, cancel and change programs Disengage the timer mode. Press TIMER, then press POWER (1). Access the Program Check screen. Press PROG. CHECK. Access the Program screen. Press PROG. CHECK again to check more information. Each time you press PROG.
  • Page 39 To cancel or change a program Cancel or change a program. Press CANCEL to cancel a program. To change program settings, press the appropriate button: START +/–, STOP +/–, DATE +/–, CH +/–, DAILY (number key “8”), WEEKLY (number key “9”) and/or SP/EP. Return to the normal screen.
  • Page 40 OPERATIONS ON VCR DECK (cont.) When programs overlap each other If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking. Example: Program 1 (you have just made) and Program 4 overlap each other.

  • Page 41: Satellite Auto Recording

    Satellite Auto ATTENTION Be sure not to turn on the DBS receiver before the program is executed; otherwise, the unit will start recording when Recording the DBS receiver’s power is turned on. If you have connected another appliance other than a DBS receiver to the AUDIO/VIDEO input (F-1) connector, be sure not to engage the Satellite Auto Recording mode;...

  • Page 42: Operations On Dvd Deck

    OPERATIONS ON DVD DECK To play back a MP3/JPEG disc, see pages 62 – 67. Basic Playback Load the disc. A Press OPEN/CLOSE (x) on the DVD deck to open the disc tray. The unit’s power comes on automatically. B Place the disc in the disc tray. Turn on the TV and select the VCR channel (or AV For details, refer to “Placing a Disc”...

  • Page 43: Playback Features

    Locating a desired scene using the Playback Features DVD menu ● Turn on the TV and select the VCR channel (or AV mode). DVD VIDEO discs may have two types of the menus; top menu ● Slide the TV/VCR/DVD switch to the right. and disc menu.
  • Page 44 OPERATIONS ON DVD DECK (cont.) Locating the start point of the item or skip the item Press SKIP (2) or SKIP (6) during playback. Example: To locate the beginning of item B from the current position, press SKIP (2) twice. To locate the beginning of item D from the current position, press SKIP (6) once.

  • Page 45: Resume Function

    Still Picture/Frame-By-Frame Resume playback. Press PLAY (4). The unit start playback from the resume Playback point. “RESUME PLAY” appears on the front display panel. Pause during playback. NOTES: Press PAUSE (9). Resume Function does not work on the Audio CD. It also may Activate frame-by-frame playback.
  • Page 46 OPERATIONS ON DVD DECK (cont.) Each time you press w e, the setting changes as follows: NONE]ACTION]DRAMA]THEATER](Back to the beginning) NONE No effect ACTION Suitable for action movies and sports programs in which sounds dynamically move. DRAMA Provides the natural and warm sound. You can enjoy movies in a relaxed mood.

  • Page 47: Adjusting The Picture Quality

    VFP function Select the parameter. Press rt repeatedly to select a parameter you want to — Adjusting the picture quality adjust, then press OK. ● Adjust gradually and confirm picture appearance results are as preferred. GAMMA Controls brightness of neutral tints while (–4 to +4): maintaining brightness of dark and bright The VFP (Video Fine Processor) function enables you to adjust...

  • Page 48: Using The On-Screen Bar

    OPERATIONS ON DVD DECK (cont.) How to Access the on-screen bar Using the on- Press PLAY SETUP twice whenever a disc is loaded. screen bar Example: During DVD VIDEO playback Example: During Video CD playback You can check disc information while the disc is loaded and you can use some functions using the on-screen bar.
  • Page 49 Basic operation on the on-screen bar Change the time information Example: When selecting the Repeat mode of DVD During playback or while stopped You can change the time information in the on-screen bar on the TV screen and the front display panel of the unit. Access the on-screen bar.
  • Page 50 OPERATIONS ON DVD DECK (cont.) Select the repeat mode. Press rt repeatedly to select the Repeat mode, then press OK. The mode changes as follows: DVD VIDEO CHAPTER]TITLE]A-B]OFF](Back to the beginning) CHAPTER The current chapter is played back repeatedly. TITLE The current title is played back repeatedly.

  • Page 51: Time Search

    A-B Repeat Playback Time Search You can repeat the desired part. You can play back a disc from the desired point by specifying the elapsed time from the beginning of the current title (for DVD VIDEO) or the disc (for Audio CD/Video CD) using the Time Access the on-screen bar.

  • Page 52: Chapter Search

    OPERATIONS ON DVD DECK (cont.) Chapter Search You can start playback the desired chapter using the on-screen bar. Access the on-screen bar. Press PLAY SETUP twice. The on-screen bar appears on the TV screen. Select menu item. Press w e to move 0 to , then press OK.

  • Page 53: Program Playback

    Program Playback Random Playback You can play back up to 99 tracks in the desired order. You can play back all the tracks on the disc in random order. Access the on-screen bar. Access the on-screen bar. Press PLAY SETUP twice in stop mode. Press PLAY SETUP twice in stop mode.

  • Page 54: Subtitle Selection

    OPERATIONS ON DVD DECK (cont.) Select the subtitle language. Press rt repeatedly to select the desired subtitle language, then press OK. Each time you press the button, the subtitle language changes. To clear the on-screen bar Press PLAY SETUP. NOTES: For DVD VIDEO Some subtitle languages are abbreviated in the pop-up window.

  • Page 55: Angle Selection

    Angle Selection When using the ANGLE button: Access the menu. Press ANGLE. You can enjoy a variety of scene angles if the DVD VIDEO disc The following pop-up window appears on the TV screen. contains “multi-angle” parts, where multiple cameras were used to shoot the same scene from different angles.

  • Page 56: Audio Language Selection

    OPERATIONS ON DVD DECK (cont.) Select menu item. Press w e to move 0 to , then press OK. The following pop-up window appears under the selected item. Example: “ENGLISH” is selected out of 4 audio languages recorded. Select the audio language. Press rt repeatedly to select the desired audio language, then press OK.
  • Page 57 Audio Channel Selection When using the A.MONITOR button: Access the menu. Press A.MONITOR. When you play certain karaoke (DVD/Video CD/SVCD), you can The following pop-up window appears on the TV screen. enjoy karaoke by selecting the audio channel to play. Example: “ST”...

  • Page 58: Parental Lock

    OPERATIONS ON DVD DECK (cont.) Parental Lock Access the DVD Set Up menu. A Press SET UP MENU. This function restricts playback of DVD VIDEO discs which B Press w e to select “ OTHERS”. contain violent (and other) scenes according to the level set by the user.
  • Page 59 Enter the password. Enter your new password. Press the number keys to Press the appropriate number keys to enter 4-digit enter a four-digit number as PARENTAL LOCK password, then press OK. COUNTRY CODE your password, then press SET LEVEL The password entered in the this step becomes the new _ _ _ _ PASSWORD password.
  • Page 60 OPERATIONS ON DVD DECK (cont.) Country/Area Code List for Parental Lock Andorra Spain United Arab Emirates Ethiopia Afghanistan Finland Antigua and Barbuda Fiji Anguilla Falkland Islands (Malvinas) Albania Micronesia (Federated States of) Armenia Faroe Islands Netherlands Antilles France Angola France, Metropolitan Antarctica Gabon Argentina...
  • Page 61 Saint Lucia Saudi Arabia Liechtenstein Solomon Islands Sri Lanka Seychelles Liberia Sudan Lesotho Sweden Lithuania Singapore Luxembourg Saint Helena Latvia Slovenia Libyan Arab Jamahiriya Svalbard and Jan Mayen Morocco Slovakia Monaco Sierra Leone Moldova, Republic of San Marino Madagascar Senegal Marshall Islands Somalia Mali...

  • Page 62: About Mp3 Disc

    OPERATIONS ON DVD DECK (cont.) About MP3 Disc NOTES: Because of the disc characteristics or recording condition, some discs may not be played back or it takes time to start playback. This unit can playback CD discs recorded by the MP3 format (we The unit does not support “packet writing”...

  • Page 63: Mp3 Playback

    Using the MP3 control display MP3 Playback Turn on the unit. Press POWER (1). You can search and play back desired groups and tracks using the MP3 control display. Select the DVD deck. Turn on the TV and select the VCR channel (or AV On the unit mode).
  • Page 64 OPERATIONS ON DVD DECK (cont.) Repeat Playback You can repeat playback of the current group, track or all groups. While MP3 control display is on the TV: Access the repeat mode. Press PLAY SETUP during playback. The current repeat mode is displayed on the MP3 control display.

  • Page 65: About Jpeg Disc

    About JPEG Disc NOTES: We recommend to record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a longer time to be displayed.) This unit can playback CD discs recorded by the JPEG format This unit can only play back baseline JPEG files*.

  • Page 66: Jpeg Playback

    OPERATIONS ON DVD DECK (cont.) Using the JPEG control display JPEG Playback Turn on the unit. Press POWER (1). You can search and play back desired groups and files using the JPEG control display. Select the DVD deck. Turn on the TV and select the VCR channel (or AV On the unit mode).
  • Page 67 Repeat Playback You can repeat playback of the current group, file or all groups. While JPEG control display is on the TV: Access the repeat mode. Press PLAY SETUP while the JPEG Control screen is displayed. The current repeat mode is displayed on the JPEG control display.

  • Page 68: Editing (Vcr Deck)

    EDITING (VCR DECK) You can use a camcorder as the source player and your Edit From A unit as the recording deck. Slide the TV/VCR/DVD switch to the right. Camcorder Make connections. Connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the unit’s front panel AUDIO and VIDEO input connectors.

  • Page 69: Edit To Or From Another Video Recorder

    You can use your unit as the source player or as the Edit To Or From recording deck. Slide the TV/VCR/DVD switch to the right. Another Video Make connections. Recorder A When using your unit as the source player ..

  • Page 70: Dubbing (From Dvd To Vcr)

    EDITING (VCR DECK) (cont.) You can dub selected scenes from the DVD disc to a cassette, Dubbing starting and stopping wherever you wish. However, it is not possible to dub the copy-protected disc. In such case, “ERROR” appears on the front display panel. (from DVD to VCR) Load a cassette and place a disc.

  • Page 71: Editing (Dvd Deck)

    EDITING (DVD DECK) You can dub selected audio from the DVD or Audio CD disc to a Digital Audio MD etc. However, it is not possible to dub the copy-protected disc. Example: Dubbing to a MD Dubbing Make connections. Connect the optical cable between the unit and the Turn on the TV and select the VCR channel (or AV digital audio device.

  • Page 72: Remote

    “4” for D. Remote A/B/C/D Code Switching Set the remote control code. The Remote is capable of controlling four JVC video units Press OK to set the code. independently. Each of units can respond to one of four codes (A, B, C or D). The remote control is preset to send A code...
  • Page 73 SONY SAMSUNG SANYO SEARS TOSHIBA ZENITH IMPORTANT Although the supplied remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.

  • Page 74: Connecting To A Dolby Digital Decoder Or An Amplifier With A Built-In Dts (Dvd Deck Only)

    REMOTE (cont.) Connecting To A Dolby Digital Decoder or An Amplifier With A Built-in DTS (DVD deck only) These instructions enable you to connect your unit to dolby digital decoder or amplifier with a built-in DTS. DIGITAL AUDIO OUT Back of unit Dolby Digital decoder or To DIGITAL AUDIO amplifier with a built-in DTS...

  • Page 75: Subsidiary Settings

    SUBSIDIARY SETTINGS You can change various mode settings on the Function Mode Set Set screen by following the procedure described below. For each mode setting, see pages 76 to 77. (VCR deck) Turn on the unit. Press POWER (1). Turn on the TV and select the VCR channel (or AV mode).
  • Page 76 SUBSIDIARY SETTINGS (cont.) * The default setting is bold in the table below. 8 PICTURE CONTROL This feature helps you to adjust the playback picture quality according to your preference. Normally select “NORM”. NORM EDIT NORM: Picture quality is adjusted automatically. SOFT EDIT: Minimizes picture degradation during editing (recording and playback).
  • Page 77 * The default setting is bold in the table below. 8 VIDEO STABILIZER When this function is set to “ON”, you can automatically correct vertical vibration in the picture when playing back unstable recordings made on another recorder. NOTES: When you finish viewing a tape, be sure to set this function to “OFF”. Regardless of the setting, this function has no effect during recording and during special effects playback.

  • Page 78: Mode Set (Dvd Deck)

    SUBSIDIARY SETTINGS (cont.) The procedure shows how to set “RESUME” to “ON” Mode Set on the DVD Set Up menu screen as an example. Turn on the unit. (DVD deck) Press POWER (1). Turn on the TV and select the VCR channel (or AV Select the DVD deck.

  • Page 79: Picture Settings

    Picture Settings * The default setting is bold in the table below. 8 MONITOR TYPE You can select the monitor type depending the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to 16:9 NORMAL “Monitor Set (DVD deck)”...
  • Page 80 SUBSIDIARY SETTINGS (cont.) 8 ANALOG DOWN MIX Set to the appropriate mode according to your audio system when you play back a DVD VIDEO disc recorded with surround multichannel audio. This DOLBY SURROUND setting affects only the analogue audio output signal from the AUDIO OUTPUT STEREO connectors (DVD) when playing back a DVD VIDEO disc recorded with surround multichannel audio.

  • Page 81: Others Settings

    Output Playback discs STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD VIDEO with 48 kHz, 16/20/24 bit linear 48 kHz, 16 bit linear PCM DVD VIDEO with DTS DTS bitstream 44.1 kHz, 16 bit stereo linear PCM DVD VIDEO with Dolby 48 kHz, 16 bit stereo linear Dolby Digital bitstream Digital Audio CD/Video CD...

  • Page 82: Child Lock

    SUBSIDIARY SETTINGS (cont.) Child Lock Scan Mode Set (DVD deck) ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. ● Turn on the TV and select the VCR channel (or AV You can disable the unit’s operation.

  • Page 83: Troubleshooting

    5. The playback picture is blurred or The video heads may be dirty. Use a dry cleaning cassette ECL-3F, or interrupted while TV broadcasts are consult your JVC dealer. clear or “USE CLEANING CASSETTE” message appears on the screen. 6. Breaks are noticeable in Hi-Fi The automatic tracking mode is Try manual tracking.
  • Page 84 TROUBLESHOOTING (cont.) PLAYBACK (DVD deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The button do not work. The operation is prohibited on the — placed disc. 2. The DVD deck can not be operated. The DVD deck is not selected. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up.
  • Page 85 MP3 Playback (DVD deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. A disc cannot be played. No MP3 files are recorded to the disc. Replace the disc. MP3 files do not have the correct file Add correct file extension (.mp3, .MP3 or extension in their file names.
  • Page 86 TROUBLESHOOTING (cont.) TIMER RECORDING (VCR deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. Timer recording won’t work. The clock and/or the timer have been Re-perform the clock and/or timer set incorrectly. settings. The timer is not engaged. Press TIMER and confirm that “#” is displayed on the front display panel.

  • Page 87: Other Problems

    OTHER PROBLEMS SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The image of TV broadcast appears The unit leaves turned on and the DVD Turn off the unit, or press VCR to select the distorted on the TV screen. deck is selected. VCR deck, then press TV/VCR so that the VCR indicator disappears from the front display panel.

  • Page 88: Questions And Answers

    QUESTIONS AND ANSWERS PLAYBACK TIMER RECORDING Q. What happens if the end of the tape is reached Q. “ ” and “#” remain lit on the front display during playback or search? panel. Is there a problem? A. The tape is automatically rewound to the A.

  • Page 89: Specifications

    SPECIFICATIONS GENERAL TUNER Power requirement : AC 120 V , 60 Hz Tuning system : Frequency synthesized tuner Power consumption Channel coverage Power on : 27 W : Channels 2 – 13 Power off : 3.1 W : Channels 14 – 69 Temperature CATV : 113 Channels...

  • Page 90: List Of Terms

    LIST OF TERMS ..........51 ............20 A-B Repeat Playback Language .......... 23 About Discs Language Code List .............. 65 JPEG Menu/Audio/Subtitle Language Set .............. 62 ........22 (DVD deck only) ..........9 ....21 Placing a Disc On-screen Language Set (DVD deck) ..........
  • Page 91 ............19 .......... 12 Pan&Scan Tape Position Indicator ........... 35 Parental Lock Tape Remaining Time ........60 ............51 Country/Area Code List Time Search ........59 ..........36 To change the settings Timer Recording – ....58 ............43 To set Parental Lock for the first time Top menu ....

  • Page 92: For Servicing (Only In U.s.a.)

    Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.

  • Page 93: Warranty (Only In U.s.a.)

    WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period.
  • Page 94 MEMO...
  • Page 96 Printed in Beijing 0803-TY-ID-BJ...

Table of Contents