Filter Button; Preset List (Lu Operation Pane); Filter Window - HP StorageWorks XP12000 User Manual

alternate path that is in the Standby status. When the primary path changes, the status of the
path becomes Normal.
• Backoff: External array replied Backoff. The path status is waiting for recovery because a
temporary error occurred in the external array's volume. Even if the primary path's status
becomes Backoff, the primary path does not changed to the alternate path immediately. After
the error recovery, the status becomes Normal. If the status cannot be recovered from the error,
the path status changes to the other status.
• Characteristic2: External LU's extended identifying information. This information is used for
identifying logical volumes in the EVA array. For more information, see
of EVA arrays (using Characteristic

Filter button

Displays the Filter window where you can restrict LUs displayed in the Device list.
Figure 34

Filter window

This window contains Enable and Disable options that control the display of unsupported devices. When
you select Enable, information about unsupported arrays appears in the Device tree and Device list.
Unsupported arrays are indicated by Unknown Devices in the Device tree and Device list.
The Disable option is selected by default.

Preset list (LU Operation pane)

Displays rows from the Device list that are about to be acted upon. You can apply settings to the local
array after checking the contents in the Preset list. Information displayed in the Preset list appears in blue
italics in the Device list. If you click Apply in the LU Operation pane, settings displayed in the Preset list
are applied to the local array. At that point, the contents of the Preset list disappear and the Device list
appears normally.
If you click Cancel in the LU Operation pane, all settings in the Preset list are canceled.
If settings in the Preset list contain errors, they are not applied to the local array even if you click Apply. In
that case, error messages appear and incorrect settings appear in the Preset list. In addition, error codes
appear in the Preset list.
NOTE: Depending on the type of errors that occur, identical error codes might be displayed for all errors
listed in the Preset list. In this case, check the status of settings to identify the source of the error.
When you right-click an item in the Preset list, the following commands appear:
• Detail
2)" on page 124.
"Identifying logical volumes
External Storage XP user guide 63