Table of Contents
Advertisement
20
HP MSA 500 G2 Storage System Maintenance and Service Guide
Interconnect Blank
To remove the component:
To replace the component, reverse the removal procedure.
Power Button/LED Assembly
To remove the component:
1. Power down the storage system (on page 9).
2. Remove the hot-plug SCSI hard drives in bays 10 through 14 ("SCSI IDs" on
CAUTION: To prevent improper cooling and thermal damage,
do not operate the storage system unless all bays are populated with
either a component or a blank.
page 40).
IMPORTANT: To press the plastic latches behind the front bezel, you
may choose to use a flat-head screwdriver.
Advertisement
Table of Contents
