Selecting Eva Lus - HP StorageWorks XP12000 User Manual

NOTE: You must select external storage LUs through the presenting controller. Failure to do so results in
new external LDEVs being placed in a blockade state shortly after a host attempts to access them.
Figure 72

Selecting EVA LUs

After you select an external logical unit (LU), the Add LU pane appears. At this point, you can configure
each individual external LU by choosing options such as the emulation type, the number of LDEVs (CVS is
used), and the LU's unique LDEV identifiers within the XP12000/XP10000/SVS200.
this step.
Figure 73 XP External LDEV definition
After this step is complete and external storage LDEVs are created, these LDEVs can be presented to any
XP12000/XP10000/SVS200-attached host for immediate use. For more information about assigning
XP12000/XP10000/SVS200 LDEVs to an XP12000/XP10000/SVS200-attached host, see the
138 Using an XP12000/XP10000/SVS200 with an EVA3000/5000 external storage
Figure 73 illustrates